The M Series manual 4 point wheelchair tie down system is a economical choice that doesn't sacrifice safety. These budget friendly wheelchair tie down system will properly secure the wheelchair, however you will still need proven occupant restraints for the person sitting in the wheelchair. Please note that even though some wheelchairs have it's own wheelchair seat belt, most have not been crash tested to prove its pull capability. Q'Straint also has crash tested lap and shoulder restraints for wheelchair users to go with the M Series Manual Tie Down system.
Easy to use Cam & Over Center designs improve user friendliness and also add tension for greater safety. Simply push the release to open the cam, place the tie down on the wheelchair, pull out remaining slack and close the cam.
Q'Straint designed J Hooks built from steel that is attached in all 4 points of the wheelchair, two in the front and two in the rear. lf you are having difficulty identifying where to place the J hook, look for the frame of the wheelchair and resist putting them on removable pieces on the wheelchair.
| Backup Manual Release | Optional Belt Cutter |
|---|---|
| Compatible With A-Track | Yes |
| Compatible With L-Track | Yes |
| Crash Tested | Yes |
| Dashboard Interface | N/A |
| Fully Automatic Wheelchair Securement | No |
| NMEDA Approved | Yes |
| NTHSA Approved | Yes |
| Requires Wheelchair Bracket | No |
| Securemnet Assistance Required | Yes |
| Travel Solo/Without Attendent | No |
