| |
Step in Tubs/Tub with
a Door - Model 954
Model 954 [with no intregal seat] Tub with a Door, step in tub, walk in tub
Purchase Step in Tubs - Model 954 -tub with a door
All walk intubs,tubs with a door, step in tub units shall be vacuum formed from
high gloss acrylic sheets, and layered on the backside with fiberglass for
strength. Each unit shall consist of three parts:
- the main body of the walk in bathtub so as not to have any
joints or seams,
- a front skirt glassed to the main body,
- a door with operating mechanism to complete the unit.
All step in tubs, tubs with a door walkin tubs shall meet or exceed all ANSI, HUD,
FHA requirements/codes governing Fiberglass Reinforced Plumbing Products,
and designed to be ADA compliant. They shall be tested and certified at
the National Association of Home Builders Research Center, and comply with
BOCA, ICBO, and SBCCI for certification. The manufacture shall also be registered with the
FDA for classification as a medical device.
Model #954 (Tub with a door {Left or Right Drain) shall measure 60” long, 32” wide, and 21” high,
with a door opening of 18-1/2”, together with a 2” threshold. It shall
be available with a left or right hand drain (door opens over drain),
and optional full skirt for access on three sides. Due to a sloping back
wall, there shall be no integral seat.
- All Walkin Tubs, with a door
models shall be suitable for recess in the floor 3” so as to present a ZERO
threshold, or may be mounted on top of the floor.
- Both the drain and overflow receptacles shall be
factory bored.
- All
mechanical hardware including screws, nuts, bolts, and washers shall be
stainless steel for lifetime use.
- The
aluminum hinge shall be of a gear configuration for added strength,
and easy door removal should it ever be
necessary.
- The gasket material shall be of a quality and
density as recommended by NASA for water integrity.
- The
floor shall feature a slip resistant surface.
- Standard colors shall be White or Bone/Almond.
OPTIONS: Whirlpool & heater ( whirlpools
feature a 1hp pump with color matching or chrome adjustabler jets),
matching Acrylic wall surround (three piece or one piece), assist bars,
hand-held shower wand, rim mounted hand-held shower wand, full line of
decorator colors (white and bone/almond are standard). This unit is not
designed for wheelchair access.
For More Information.....click here.
For Warranty Information.....click here.
For Installation Instructions.....click here. Be patient the PDF file
is larger and will take some time uploading
For Diagrams .....click here. Be patient the PDF file
is larger and will take some time uploading
Purchase Step in Tubs - Model 954
SKU: 954
Other products in the category
Walk- in Bath Tubs :
Safety Bath
Inc. --
Safety Bath Inc.
Our Walk-In Bathtub is
designed to allow ease of access for those unable to bathe . . .
Step in Tubs
- Model 6042 --
All units shall be vacuum formed from
high gloss acrylic sheets, and layered on the backside . . .
Step in Tubs -
Model 854 -- All units shall be vacuum formed from
high gloss acrylic sheets, and layered on the backside . . .
Tub
Lift -- Automatic Bath Lift Many people miss the
luxury of taking a bath once the act of getting . . .
Related Products
Step in Tubs
- Model 6042
StoreFront | ADA Accessible Design Standards | Bathroom Aids | Automatic Door Openers | Barrier Free Shower Pans | Assistive Devices for Daily Living (ADL's) | Barrier Free
Construction | Xtra Categories | Grab Bars | Lifts | Ramps | Portable Shower | Roll in Showers | Shower
Doors | Threshold
Ramps | Walk- in Bath
Tubs | Wall Hung Shower
Seats
|